LRCC

The one I received from Dormobile had all the fittings screwed on in the wrong places Worked it out eventually but wasn't impressed at the time.
Now I have a table with lots of screw holes on show underneath, somebody did suggest that it might have been for a lhd vehicle.

I've since decided to fit this type of leg to it as the original set up is rather clumsy

http://www.ebay.com.au/itm/Chrome-Islan ... 3f2c9160af

Perhaps I have been too hasty in my praise!

I will have to check - thanks for the heads up

Indeed I was a might hasty.

I have Jim at Dormobile on the case. Will wait to see what he has to say. He is meant to be scanning and sending me the copy of the drawings they use. I did have some photos I took of Phil's table but several computers later and I can't find them!

I don't know whether he/you would mind sharing them, but I would be very interested in seeing some drawings, as all I have left of mine is the plastic veneer from the top, which has gone brittle and curled up, all the wood has rotted off it.

Ant