1975 LHD 109 SW
Re: 1975 LHD 109 SW
Hi Brad, I think as long as we try our best no matter what situation we are in were doing good.
I did lot more painting through the week but mainly I managed to nearly finish electrics on 1958 S2 which is at the moment in the way of my project and I don't want to start grinding and welding with this beauty standing near. Too much nasty dust would come her way.
Tomorrow morning im going back to rehabilitation to get back some dexterity
Catch you later
I did lot more painting through the week but mainly I managed to nearly finish electrics on 1958 S2 which is at the moment in the way of my project and I don't want to start grinding and welding with this beauty standing near. Too much nasty dust would come her way.
Tomorrow morning im going back to rehabilitation to get back some dexterity
Catch you later
-
- Posts: 706
- Joined: Mon Feb 20, 2012 8:22 pm
- Info: romanyrose
Re: 1975 LHD 109 SW
G'day Bro, all I can say is well done you should be proud of yourself. Catch you later. Brad
.
![tiphat :tiphat:](./images/smilies/tiphat.gif)
Re: 1975 LHD 109 SW
Hey I'm back in business. Laser guides, out riggers front legs all going in with utmost care and presission. Original chassis have about 0.4" twist to it but I take it it's within Land Rover manufacturing tolerances. We will try to adjust it using winch to get it straightened but I think it's already near enough.
- DrivingDutchman
- Posts: 392
- Joined: Mon Feb 10, 2014 11:44 am
- Location: Raunds, Northants
Re: 1975 LHD 109 SW
Comming on well.
Wsh I had your welding skills...
Michiel
Wsh I had your welding skills...
![bow :bow:](./images/smilies/bow.gif)
Michiel
1969 109 sw dormobile Dora
1996 overland defender sw 110 Nellie
1962 109 sw safari diesel Hannie (sold)
1973 88 series 3 soft top in various bits on the drive...
1996 overland defender sw 110 Nellie
1962 109 sw safari diesel Hannie (sold)
1973 88 series 3 soft top in various bits on the drive...
Re: 1975 LHD 109 SW
Another full day at the workshop with my mate. We got there for 7AM, did heaps of welding and fabricating, but at the end we run out of 1mm cutting discs and welding wire so we finished early at 7PM. To be Continued tomorrow
Re: 1975 LHD 109 SW
To aid the final fitting of rear xmember today I tidied up the rear tub. It's so far only in primer because I'll be doing some changes to the interior storage boxes. I have painted the underside as well to stop the galvanic corrosion between the steel supports and bare aluminium