Workshop and Technical tips & tricks.
-
RMS
- Posts: 2236
- Joined: Wed Feb 15, 2012 12:02 am
- Location: Near Wakefield, UK, in God's own Country!
Post
by RMS » Sun Jul 05, 2015 2:55 pm
chippit wrote:Hi Karl,
P.S. Does anyone know why the older roof has 4 large holes drilled in each corner of the bendy section? The later one does not have them.
The holes are for the elastic rope which pulls the sides together when putting the roof up.
The later roofs had the elastic in the wooden side sections, near the top (as far as I remember).
Cheers,
Robin.
1967 109" Carawagon 200TDi
1972 109" SW Carawagon 2.5NA
1958 109" Carawagon 2.25P (project)
1972 109" Carawagon 200 or 300TDi (project)
1974 Dormobile 2.25D (project)
(Robin on S2C forum)
-
chippit
- Posts: 57
- Joined: Sun Feb 24, 2013 6:10 pm
Post
by chippit » Sun Jul 05, 2015 8:37 pm
Thank you Robin,
Yes my later roof has the holes in the plywood where the elastic goes through and x4 aluminium 'U' shaped brackets which clamp the elastic.
Regards Christine
-
chippit
- Posts: 57
- Joined: Sun Feb 24, 2013 6:10 pm
Post
by chippit » Tue Oct 13, 2015 6:52 am
Hi Karl,
Did you manage to sort out the wooden sections for your carawagon?
I am getting very close to getting my 1975 carawagon roof finished and then will be starting the early roof which is the same as yours,
let me know if you need templates.
Regards Christine