Hi all
Just wondered if anyone had a fuel tank pick up pipe for a Eberspacher going spare? They are £30 on ebay and I just cannot justify that expenditure at the moment. A pick up pipe is all that is stopping me getting the heater up and running.
Cheers Mick
Wanted. Pick up for Eberspacher
-
Jabbawocky
- Posts: 431
- Joined: Mon Feb 20, 2012 10:11 pm
- Info: Barney the Dormobile
- Location: Yorkshire Dales
-
RMS
- Posts: 2236
- Joined: Wed Feb 15, 2012 12:02 am
- Location: Near Wakefield, UK, in God's own Country!
Re: Wanted. Pick up for Eberspacher
I happened to have a length of 1/8" copper tube which I used for mine.
I drilled a 1/8" hole through the brass Diesel return tank fitting, to the side of the return pipe, and soldered it into place.
You can get away with using a T in the Diesel pipe to the engine, though the heater pick up is supposed to be shorter than the engine pick up to stop you using all the Diesel in the tank
Hope that helps,
Robin.
I drilled a 1/8" hole through the brass Diesel return tank fitting, to the side of the return pipe, and soldered it into place.
You can get away with using a T in the Diesel pipe to the engine, though the heater pick up is supposed to be shorter than the engine pick up to stop you using all the Diesel in the tank
Hope that helps,
Robin.
1967 109" Carawagon 200TDi
1972 109" SW Carawagon 2.5NA
1958 109" Carawagon 2.25P (project)
1972 109" Carawagon 200 or 300TDi (project)
1974 Dormobile 2.25D (project)
(Robin on S2C forum)
1972 109" SW Carawagon 2.5NA
1958 109" Carawagon 2.25P (project)
1972 109" Carawagon 200 or 300TDi (project)
1974 Dormobile 2.25D (project)
(Robin on S2C forum)